The Ultimate Guide to Resetting the Waste Ink Absorber on Your Canon PIXMA iP4800 Printer
Canon Waste Ink Absorber PIXMA iP4800 Reset Software: A Complete Guide
If you own a Canon PIXMA iP4800 printer, you may encounter an error message that says "the ink absorber is almost full" or "the ink absorber is full". This means that the waste ink absorber, a sponge-like pad that collects excess ink during printing and cleaning, has reached its capacity and needs to be replaced or reset.
Canon Waste Ink Absorber PIXMA iP4800 reset software
Download File: https://www.google.com/url?q=https%3A%2F%2Ftinourl.com%2F2tVI5f&sa=D&sntz=1&usg=AOvVaw1sx3xCfo-NscirSOjf9XH4
Replacing the waste ink absorber is not a simple task, as it requires disassembling the printer and ordering a new part from Canon. However, there is a way to reset the waste ink counter and continue using your printer without replacing the absorber. This can be done by using a Canon Waste Ink Absorber PIXMA iP4800 Reset Software, which is a program that can reset the counter and clear the error message.
How to Use Canon Waste Ink Absorber PIXMA iP4800 Reset Software
Before you use the Canon Waste Ink Absorber PIXMA iP4800 Reset Software, you need to make sure that your printer is turned off and disconnected from the power source and the USB cable. You also need to download the software from a reliable source and extract it to your computer.
Once you have done that, follow these steps to reset your waste ink counter:
Open the cover of your printer and locate the Resume button (a triangle inside a circle) and the Power button.
Press and hold the Resume button while you plug in the power cable. The green LED light should come on.
Keep holding the Resume button and press the Power button. The LED light should change to amber and then back to green.
Release both buttons. Your printer is now in service mode.
Run the Canon Waste Ink Absorber PIXMA iP4800 Reset Software on your computer and click on the Set button.
Wait for a few seconds until you see a message that says "A function was finished".
Turn off your printer and close the cover.
Turn on your printer again and check if the error message is gone.
Congratulations! You have successfully reset your waste ink counter and cleared the error message. You can now resume printing with your Canon PIXMA iP4800 printer.
Things to Consider When Using Canon Waste Ink Absorber PIXMA iP4800 Reset Software
While using Canon Waste Ink Absorber PIXMA iP4800 Reset Software can save you time and money, there are some things you need to be aware of before you use it:
The software is not an official product from Canon, so use it at your own risk. Canon does not endorse or support this software and may void your warranty if you use it.
The software only resets the waste ink counter, but does not clean or replace the waste ink absorber. This means that the absorber will continue to accumulate ink and may eventually overflow or leak, causing damage to your printer or your surroundings.
The software may not work for all models or versions of Canon printers. Make sure you have a compatible printer before you use it.
The software may not work if your printer has other problems or errors that prevent it from entering service mode.
Therefore, it is recommended that you use Canon Waste Ink Absorber PIXMA iP4800 Reset Software only as a temporary solution until you can replace the waste ink absorber or get your printer serviced by a professional.
Conclusion
In this article, we have shown you how to use Canon Waste Ink Absorber PIXMA iP4800 Reset Software to reset your waste ink counter and clear the error message on your printer. This can help you extend the life of your printer and save you from buying a new one. However, we have also warned you about the potential risks and limitations of using this software, so use it with caution and discretion.
We hope this article has been helpful and informative for you. If you have any questions or comments, feel free to leave them below. Happy printing!
Why You Need Canon Waste Ink Absorber PIXMA iP4800 Reset Software
The waste ink absorber is an important component of your Canon PIXMA iP4800 printer, as it prevents ink from spilling and staining your printer or your desk. However, over time, the absorber can get saturated with ink and trigger an error message that prevents you from printing normally.
This error message is not only annoying, but also potentially harmful to your printer. If you ignore it and continue to print, the waste ink absorber may overflow or leak, causing damage to your printer's internal parts or electrical circuits. This can result in poor print quality, malfunctioning, or even fire hazards.
Therefore, you need Canon Waste Ink Absorber PIXMA iP4800 Reset Software to reset your waste ink counter and clear the error message as soon as possible. This software can help you extend the life of your printer and avoid costly repairs or replacements.
Where to Get Canon Waste Ink Absorber PIXMA iP4800 Reset Software
Canon Waste Ink Absorber PIXMA iP4800 Reset Software is not an official product from Canon, so you cannot get it from their website or customer service. However, you can find it online from various sources that offer it for free or for a small fee.
Before you download Canon Waste Ink Absorber PIXMA iP4800 Reset Software from any source, make sure you check its credibility and reliability. Read the reviews and ratings from other users, and scan the file for viruses or malware. You should also backup your printer's data and settings before you use the software, in case something goes wrong.
Alternatively, you can also get Canon Waste Ink Absorber PIXMA iP4800 Reset Software from a professional technician who can reset your waste ink counter for you. This may be more expensive and time-consuming, but it can also ensure that your printer is properly serviced and maintained.
How to Clean Canon Waste Ink Absorber PIXMA iP4800
Even if you use Canon Waste Ink Absorber PIXMA iP4800 Reset Software to reset your waste ink counter, you may still want to clean your waste ink absorber from time to time. This can help you prevent ink from overflowing or leaking, and improve your print quality and performance.
Cleaning the waste ink absorber is not an easy task, as it requires disassembling your printer and removing the absorber from its holder. You also need to wear gloves and protective clothing, as the ink can stain your skin and clothes.
Once you have removed the waste ink absorber, follow these steps to clean it:
Rinse the absorber under running water until the water runs clear. You may need to squeeze the absorber gently to remove the ink.
Place the absorber on a paper towel and let it air dry completely. Do not use a hair dryer or any heat source, as this may damage the absorber.
Reinstall the absorber in its holder and reassemble your printer.
Note that cleaning the waste ink absorber does not reset the waste ink counter, so you still need to use Canon Waste Ink Absorber PIXMA iP4800 Reset Software to clear the error message.
How to Replace Canon Waste Ink Absorber PIXMA iP4800
If you have used Canon Waste Ink Absorber PIXMA iP4800 Reset Software several times, or if your waste ink absorber is damaged or worn out, you may need to replace it with a new one. This can ensure that your printer works properly and safely.
Replacing the waste ink absorber is not a DIY job, as it requires ordering a new part from Canon and following their instructions carefully. You may also need to use special tools and skills to remove and install the new absorber.
Therefore, it is recommended that you contact Canon customer service or a professional technician to replace your waste ink absorber for you. This may cost you some money, but it can also guarantee that your printer is serviced and maintained correctly.
Conclusion
In this article, we have shown you how to use Canon Waste Ink Absorber PIXMA iP4800 Reset Software to reset your waste ink counter and clear the error message on your printer. This can help you extend the life of your printer and save you from buying a new one. However, we have also warned you about the potential risks and limitations of using this software, so use it with caution and discretion.
We have also shown you how to clean and replace your waste ink absorber, which are important steps to maintain your printer's performance and safety. Cleaning the absorber can prevent ink from overflowing or leaking, while replacing the absorber can ensure that your printer works properly and safely.
We hope this article has been helpful and informative for you. If you have any questions or comments, feel free to leave them below. Happy printing!
Conclusion
In this article, we have shown you how to use Canon Waste Ink Absorber PIXMA iP4800 Reset Software to reset your waste ink counter and clear the error message on your printer. This can help you extend the life of your printer and save you from buying a new one. However, we have also warned you about the potential risks and limitations of using this software, so use it with caution and discretion.
We have also shown you how to clean and replace your waste ink absorber, which are important steps to maintain your printer's performance and safety. Cleaning the absorber can prevent ink from overflowing or leaking, while replacing the absorber can ensure that your printer works properly and safely.
We hope this article has been helpful and informative for you. If you have any questions or comments, feel free to leave them below. Happy printing!
Conclusion
In this article, we have shown you how to use Canon Waste Ink Absorber PIXMA iP4800 Reset Software to reset your waste ink counter and clear the error message on your printer. This can help you extend the life of your printer and save you from buying a new one. However, we have also warned you about the potential risks and limitations of using this software, so use it with caution and discretion.
We have also shown you how to clean and replace your waste ink absorber, which are important steps to maintain your printer's performance and safety. Cleaning the absorber can prevent ink from overflowing or leaking, while replacing the absorber can ensure that your printer works properly and safely.
We hope this article has been helpful and informative for you. If you have any questions or comments, feel free to leave them below. Happy printing!
Conclusion
In this article, we have shown you how to use Canon Waste Ink Absorber PIXMA iP4800 Reset Software to reset your waste ink counter and clear the error message on your printer. This can help you extend the life of your printer and save you from buying a new one. However, we have also warned you about the potential risks and limitations of using this software, so use it with caution and discretion.
We have also shown you how to clean and replace your waste ink absorber, which are important steps to maintain your printer's performance and safety. Cleaning the absorber can prevent ink from overflowing or leaking, while replacing the absorber can ensure that your printer works properly and safely.
We hope this article has been helpful and informative for you. If you have any questions or comments, feel free to leave them below. Happy printing! ca3e7ad8fd