How to Reset Canon Pixma Printers Using Service Mode Tool
If you have a Canon Pixma printer that is showing an error code 5B00 or other errors related to the waste ink absorber, you may need to use a service mode tool to reset the printer and clear the error. A service mode tool is a software that can access the service mode of the printer and perform various maintenance functions.
There are different versions of service mode tools available for different models of Canon Pixma printers. One of them is the service mode tool version 1.050, which is compatible with some older models of Canon Pixma printers, such as MG6100[^1^]. Another one is the service mode tool version 3400, which is compatible with some newer models of Canon Pixma printers, such as MG6300[^2^]. You can download these tools from various sources on the internet, but be careful to choose a safe and reliable one.
To use the service mode tool, you need to follow these steps:
canon pixma service mode tool version 1.050 128
Download: https://tlniurl.com/2tGciZ
Turn off your printer and disconnect the USB cable from your computer.
Press and hold the Resume/Cancel button on your printer while turning it on.
Release the Resume/Cancel button when the power light flashes green twice.
The printer is now in service mode. Connect the USB cable to your computer and open the service mode tool software.
Select your printer model and region from the drop-down menus.
Load some A4 or Letter paper into your printer.
Click on EEPROM Information (3) to print out the current status of your printer.
Click on Main (1) and then Set to reset the waste ink counter.
The printer will print out a confirmation message.
Click on EEPROM Information (3) again to print out the new status of your printer.
Compare the results before and after the reset. The waste ink counter should be zero or close to zero.
Close the service mode tool software and turn off your printer.
Wait for 10 seconds and then turn on your printer again.
Your printer should be ready to use without any error codes.
Note: This method may not work for all models of Canon Pixma printers. If you encounter any problems or errors, please contact Canon support or a qualified technician for assistance.Benefits of Resetting Canon Pixma Printers Using Service Mode Tool
Resetting Canon Pixma printers using service mode tool can have some benefits for the users, such as:
It can save money and time by avoiding the need to replace the waste ink absorber or take the printer to a service center.
It can extend the life span of the printer by preventing the waste ink from overflowing and damaging the printer components.
It can improve the print quality by clearing any clogs or errors in the ink system.
It can restore the normal functions of the printer and eliminate any error codes or messages.
However, resetting Canon Pixma printers using service mode tool also has some drawbacks and risks, such as:
It can void the warranty of the printer if it is not done by an authorized service provider.
It can cause environmental problems by disposing of the waste ink improperly.
It can damage the printer if it is done incorrectly or with an incompatible tool.
It can be illegal in some countries or regions if it violates the intellectual property rights of Canon.
Therefore, users should be careful and responsible when using service mode tool to reset Canon Pixma printers. They should follow the instructions carefully and use the correct tool for their printer model. They should also dispose of the waste ink in an appropriate way and respect the laws and regulations of their country or region. 29c81ba772
https://www.projectenigma.org/group/mysite-200-group/discussion/758724de-ac6e-4845-8e2c-b79ce9b1ea12